UV Sheet Price in Pakistanc UV sheets are popular decorative boards used especially for wardrobes, kitchen cabinets, wall panels, and furniture fronts. They have a UV-cured glossy or semi-glossy surface that gives a striking finish and decent durability. The price of UV sheets in Pakistan varies significantly depending on thickness, brand, gloss level, type of core board, and the city.
Typical Price Ranges
For standard-size sheets (around 4×8 feet), recent market observations give these approximate price ranges:
| Type / Finish | Approx Price (PKR per Standard Sheet) |
|---|---|
| Light UV sheet (basic gloss, thinner core) | ~ 5,000-6,000 |
| MDF UV sheet (medium core, decent surface) | ~ 4,500-5,500 |
| Lamination-resistant chipboard with UV finish | ~ 3,000-4,000 |
| Wardrobe UV sheet (higher gloss, visible usage) | ~ 6,000-8,000 |
| High Gloss / Super Gloss UV sheet (premium surface, high reflectivity) | ~ 10,000-13,500+ |
| UV sheets for “modern kitchen” grade (top quality) | ~ 9,000-10,000 or more depending on brand and finish |
These ranges are for urban centres; smaller towns may see somewhat different rates.
Factors That Influence UV Sheet Price
Several things make certain UV sheets cost more or less:
Thickness of the Core
Thicker core boards (16-18 mm and up) cost more; thinner ones are cheaper but less durable.Surface Finish / Gloss Level
The gloss or sheen level has a strong effect: high gloss or super gloss finishes are more expensive. Matte or light gloss finishes cost less.Quality of UV Coating
Better coatings resist scratches, yellowing, fading. If the coating is premium or imported, price goes up.Core Material
MDF or good quality particleboard cores cost more. Cheaper UV sheets might use lesser quality cores.Brand Reputation
Well-known brands tend to charge higher due to consistent finish quality, warranty, better edges, fewer defects.Two-sided Finish vs One Side
Sheets that are glossed on both sides or have finishing all around edges cost more.Location / Transport
In big cities (Karachi, Lahore, Islamabad), supply is good and competition helps moderate prices. In remote areas or where transport is costly, final price is higher.Market Raw Material Cost
Cost of resin, laminates, UV curing materials, board cores, plus fuel transport make a difference. Demand fluctuations also impact price.
What to Expect as Buyer
If you're planning to buy UV sheets:
For basic use (less visible parts, lower budget), you can aim for the lower range ( ~ PKR 3,000-6,000 ) if thickness and finish allow.
For visible and important furniture or kitchen fronts where appearance matters, spending in the higher range ( ~ PKR 9,000-13,500+ ) often gives better life and look.
Always check a sample under light to see finish, reflectivity, edge quality, whether gloss is uniform.
Ask whether gloss is durable (resists scratches) and whether finish is applied on both sides.
Conclusion
UV sheet price in Pakistan today roughly falls between PKR 3,000 and PKR 13,500+ per standard full sheet depending on how premium the sheet is (thickness, gloss, brand). For middle-quality sheets for furniture, expect prices around PKR 5,000-8,000, and for top-quality high gloss or super gloss, prices go up. Knowing what finish, core thickness, and brand you want will help you pick the right balance between cost and quality.
